Sunbrella Rectangle Shade Sails

FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS

Sunbrella Standard Rectangle Shade Sails are longer than the square shade sails, which can be used for covering patios and they are great for cars, boats, campers and RVs. They can be used to cover baseball dugouts and even animal shelter exercise areas. We keep in stock 9 of the most popular colors and we also offer 5 special order colors for an additional cost and it will add an extra week to the lead time of manufacturing the shade sail using special order colors.

Sunbrella fabric is water resistant, and shade sails made from this fabric have to be installed with at least a 20 degree slope to allow water to run off and not pool on top of the sail. The chart below lists measurements for the amount of vertical drop recommended based on the size of the sail. Measurements are rounded.

Additionally, the perimeter of each sail is designed with a gentle curve inwards towards the center of the sail to control fabric tension. This inward curve will be approximately 6-8% of the length of each side of the shade sail. Therefore, when tension is placed on the shade sail, the fabric will not wrinkle or sag. Shade sails, when installed properly, do not sag or flap in the wind. When calculating the size of the shade sail that you would need for a certain area, be sure to allow for about 12 to 18 inches of space between the shade sail’s d-rings and the mounting points for the necessary mounting hardware including turnbuckles. It is better for the shade sail to be too small than too large. If it is too large, you will not be able to tighten when necessary, but if they are too small, you can still attach the sail to the mounting points with the help of a few lengths of chain or a piece of aircraft cable.

Note: 1) Due to the available Sunbrella fabric widths, and depending on the size ordered, your shade sail may have seams. 2) Due to manufacturing tolerances and fabric stretch, finished shade sail dimensions may vary 1.5″ +/-.

All standard size Sunbrella Rectangle Shade Sails are made to order. Therefore, all sales are final. No returns or refunds will be accepted. Orders cannot be changed or cancelled after 1 business day from the time the order was placed.

At Least 20° Slope Required for Water Run Off
Shade Sail Size Shade Sail Size	Amount of Drop Amount of Drop
10 Ft	3 Ft 7 In
12 Ft	4 Ft 4 In
14 Ft	5 Ft 0 In
16 Ft	5 Ft 8 In
18 Ft	6 Ft 4 In
20 Ft	7 Ft 0 In
22 Ft	7 Ft 10 In
24 Ft	8 Ft 10 In
25 Ft	9 Ft 4 In
A 20° Slope is about a 35% difference of the high and low mounting points

10 Year Limited Warranty on Fabric 1 Year warranty on Workmanship (Sewing and Stitching, etc) Sunbrella Awning and Marine Fabric Solution dyed to give excellent fade and weather resistance Provides up to 98% UV Bock and reduces temperatures under shade by up 32%

FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS Perimeter Options – 1 1/2 and 2 inch webbing, 1/8 and 1/4 inch cable reinforced Available in 9 stock and 5 Special Order Colors All D-Rings and hardware are stainless steel Flame Resistant User Friendly Installation Instructions

Need a custom shade sail – Click the link below

Custom Shade Sail Quote Form

Sunbrella® Stock Colors Click to Enlarge
Terra-Cotta 4622	Mohave Sand 4628	Forest Green 4637	Pacific Blue 4601
Natural White 4604	Taupe 4648	Jockey Red 4603	Beige 4620
Sunflower Yellow 4602

Sunbrella® Special Order Colors Click to Enlarge *Special Order Colors have an additional charge and longer delivery times*
*Navy* 4626	*Aquamarine* 4623	*Black* 4608
*Tuscan* 4677	*Turquoise* 4610