(Click to Enlarge)

Sunbrella® Right Angle Triangle Shade Sail
10ft x 12ft x 15ft 7in - Beige

SunBrella Shade Sails provide protection from the Sun & Rain

Residential Sail Corner
With 1.5 inch Webbing

Sunbrella® Right Angle Triangle Shade Sails are made with Sunbrella® fabric that is breathable and helps to keep you cool and comfortable even in hot weather. These sails are covered with a limited 10 year fabric warranty and provide you with a UV protection factor of up to 98%. This state of the art unique material is extremely resilient to moisture and extreme temperatures. Sunbrella's solution dyed acrylic fabric is fade and water resistant. The fabric also resists stains, mildew and rot. The perimeter of each sail contains seatbelt type webbing for increased strength & durability and is designed with a gentle catenary curve inwards towards the center of the sail to control the fabric tension. Each corner has a welded solid marine grade, stainless steel attachment ring to aid in attaching to a structurally sound fixing point. Shade sails, when installed properly, do not sag or flap in the wind.

Residential Sail with 1-1/2 inch UV inhibitive reinforcement webbing. Used for normal residential use in sails up to about 325 square feet. 1-1/2 inch webbing is rated at an 800 pound break strength.

Sunbrella® Right Angle Triangle Shade Sails comes in eight color choices: Mohave Sand, Forest Green, Pacific Blue, Natural White, Taupe, Jockey Red, Beige and Terracotta. Each sail comes with user friendly instructions for installation. Due to the limited available Sunbrella® fabric widths, there will be seams approximately every 40-57 inches.

Click here for Custom Shade Sail Quote Form, fill it out and fax it to 901-531-8436. It will take approximately 2 business days to process and quote the shade sail you need. All orders placed for a custom shade sail will take 2 to 3 weeks to ship once the order has been placed.

Sunbrella® fabric is water resistant and Shade Sails made from this fabric must be installed at a 20 degree slope to allow water to run off and not pool on top of the sail. The measurement is based on the size of the sail for the amount of vertical drop from one attachment point of the sail to the opposite attachment point of the sail to allow water run off. Measurements are rounded.

This 10ft x 12ft x 15ft 7in Sumbrella™ Right Angle Triangle Shade Sail must have a drop of at least 3 foot 7 inches sloping the 10 ft side and at least a 4 foot 4 inches drop if sloping the 12ft side and at least a 5 foot 8 inches drop if sloping the 15ft 7in side to achieve the necessary 20 degree slope to allow for water run off.