Sunbrella Shade Sail Right Angle Triangle
20ft x 20ft x 28ft 3in - MCC-RATTC20SS

FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS

Sunbrella Right Angle Triangle Shade Sails 20ft x 20ft x 28ft 3in (MCC-RATTC20SS) are perfect for covering the inside corner of the outside of a house or building, when you have two equal lengths and a longer angled side. This Shade Sail is A=20' x B=20' x C=28' 3' or A=240" x B=240" x C=339" from d-ring to d-ring of each side. We keep in stock 8 of the most popular colors and we also offer 8 special order colors for an additional cost and it will add an extra week to the lead time of manufacturing the shade sail using special order colors.

Sunbrella Shade Sails will give you maximum protection from the heat and UV's from the sun. This state of the art fabric is unaffected by moisture and extreme natural temperature. Sunbrella's solution dyed acrylic fabric is fade and water resistant. The near waterproof fabric also resists stains, mildew and rot. Since they are water resistant, you not only get protection from the sun, but also protection from when it rains or snows.

At Least 20° Slope Required for Water Run Off
Shade Sail Size	Amount of Drop
10 Ft	3 Ft 7 In
12 Ft	4 Ft 4 In
14 Ft	5 Ft 0 In
16 Ft	5 Ft 8 In
18 Ft	6 Ft 4 In
20 Ft	7 Ft 0 In
22 Ft	7 Ft 10 In
24 Ft	8 Ft 10 In
25 Ft	9 Ft 4 In
A 20° Slope is about a 35% difference of the high and low mounting points

Sunbrella fabric is water resistant, and shade sails made from this fabric have to be installed with at least a 20 degree slope to allow water to run off and not pool on top of the sail. The chart at the right lists measurements for the amount of vertical drop recommended based on the size of the sail. Measurements are rounded.

Additionally, the perimeter of each sail is designed with a gentle curve inwards towards the center of the sail to control fabric tension. This inward curve will be approximately 6-8% of the length of each side of the shade sail. Therefore, when tension is placed on the shade sail, the fabric will not wrinkle or sag. Shade sails, when installed properly, do not sag or flap in the wind.

All standard size Sunbrella right angle triangle shade sails are made to order. Therefore, all sales are final. No returns or refunds will be accepted.

FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS

All standard size shade sails are made to order. Therefore, all sales are final. No returns or refunds will be accepted.

FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS

Sunbrella Shade Sail Right Angle Triangle 20ft x 20ft x 28ft 3in - MCC-RATTC20SS - ID#:MCC-RATTC20SS Mfg'd By: MightyCovers.com  SKU#:RATTC20SS
Choose Webbing or Cable:	1.5 Inch Webbing 2 Inch Webbing [2 Inch] (Adds $118.00) 1/8 Inch Cable [1/8 Inch Cable] (Adds $232.00) 1/4 Inch Cable [1/4 Inch Cable] (Adds $360.00)
Choose Color:	Color Choice Forest Green (4637) Terra-Cotta (4622) Mohave Sand (4628) Pacific Blue (4601) Natural White (4604) Taupe (4648) Jockey Red (4603) Beige (4620) Sunflower Yellow (4602) Navy (4626) [Special Order] (Adds $308.00) Sky Blue (4624) [Special Order] (Adds $308.00) Salmon (4627) [Special Order] (Adds $308.00) Black (4608) [Special Order] (Adds $308.00) Logo Red (4666) [Special Order] (Adds $308.00) Erin Green (4600) [Special Order] (Adds $308.00) Turquoise (4610) [Special Order] (Adds $308.00)
Hardware Mounting Kit:	NO HARDWARE KIT Add Triangle Mounting Kit (403720) (Adds $43.95)
Regular Price: $1,353.66 Sales Price: $1,014.95 You Save $338.71 or 25.02%