Sunbrella 19 foot Square Shade Sails (MCC-SQPB19SS) are used for covering decks, patios, pools, outdoor play areas, and many other applications. They are very inexpensive compared to permanent structures and portable enough to take down and put up, when the need arises. This Square Shade Sail is A=19' x B=19' or A=228" x B=228" from d-ring to d-ring of each side. We keep in stock 8 of the most popular colors and we also offer 8 special order colors for an additional cost and it will add an extra week to the lead time of manufacturing the shade sail using special order colors.
At Least 20° Slope Required |
|
Shade Sail Size |
Amount of Drop |
10 Ft | 3 Ft 7 In |
12 Ft | 4 Ft 4 In |
14 Ft | 5 Ft 0 In |
16 Ft | 5 Ft 8 In |
18 Ft | 6 Ft 4 In |
20 Ft | 7 Ft 0 In |
22 Ft | 7 Ft 10 In |
24 Ft | 8 Ft 10 In |
25 Ft | 9 Ft 4 In |
A 20° Slope is about a 35% |
Sunbrella Shade Sails will give you maximum protection from the heat and UV's from the sun. This state of the art fabric is unaffected by moisture and extreme natural temperature. Sunbrella's solution dyed acrylic fabric is fade and water resistant. The near waterproof fabric also resists stains, mildew and rot. Since they are water resistant, you not only get protection from the sun, but also protection from when it rains or snows.
Sunbrella fabric is water resistant, and shade sails made from this fabric have to be installed with at least a 20 degree slope to allow water to run off and not pool on top of the sail. The chart at the right lists measurements for the amount of vertical drop recommended based on the size of the sail. Measurements are rounded.
All standard size Sunbrella square shade sails are made to order. Therefore, all sales are final. No returns or refunds will be accepted.
FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS
All standard size square shade sails are made to order. Therefore, all sales are final. No returns or refunds will be accepted.
FREE SHIPPING ON ALL SUNBRELLA SHADE SAILS
Nineteen foot square shade sails come with 2 inch UV inhibitive reinforcement webbing sewn around the perimeter of the shade sail. They are also available with 1/4 inch cable reinforcement.
![]() |
![]() |
![]() |
![]() |
 
Last Updated: 03/28/2018 03:01 PM - ID:3280
Related Terms: Sunbrella Square Shade Sail 19 foot MCC-SQPB19SS