Custom Sandbox Covers - 18 oz Poured Rubber Vinyl

Keep Sand Clean and Ready for Use with Custom Sandbox Covers

Mighty Covers™ offers Custom Sandbox Covers made from the most advanced and improved 18 oz. solid reinforced poured rubber vinyl. Our covers are designed to fit your swing set or fort sandbox -- we can make your sandbox cover to nearly any size that you may need. You can choose to have your cover made with post cut-outs and notches to provide your cover with a supremely snug and secure fit. Poured rubber vinyl covers come only in the colors Blue or Green.

Please note that even though the 18oz poured rubber fabric is waterproof, when there are seams and water is allowed to puddle or stand on the seams, they could leak. To prevent this, the covers may need a ball, bucket or something else under the cover to tent up the cover and allow the water to drain off of the cover.

How will you choose to fasten your cover to the sandbox? You can select stainless steel snaps or grommets that are sewn into the covers for easy removal and replacement (see photos). Or, you can choose no fasteners at all.

Screw In Snaps
Screw In Snaps
Easy to install snaps.
The caps of the snaps are
installed in the cover and
the other parts attach with
a phillips head screwdriver.
Grommets are also available
Snaps are easy to install
and easy to use. Made of
stainless steel that resist
rust and corrosion.
Snaps are installed in the
covers 1/2 inch from the
edges
Easy to use Snaps
Easy to use Snaps
***IMPORTANT NOTE***
We do not try and match existing snap placements
that are on your play set now, however we send
new snaps to screw into your playset
with a phillips head screwdriver.

Poured Rubber Colors
Click to Enlarge
Green
Green
Blue
Blue


Custom Sandbox Cover Features
Click to Enlarge
Reinforced Cutouts
Corner Cutouts
Snap Enclosure
Snap Enclosure
Grommets
Grommets

Custom Sandbox Covers usually take 5 to 7 business days to ship and 3-9 days more to be delivered. Please make sure you supply accurate outside edge to outside edge dimensions of the sandbox. Measurements will be accurate to within 1 inch.

Sandbox Cover Example - Suppose you have a 60" x 72" sandbox (measured outside edge to outside edge) with 4x 4 posts in each corner, and you want the cover to drop down the outside of the sandbox wall 3 by inches. The finished cover will be 66" x 78" with 8-1/2" square cutouts on each corner. The 8-1/2" cutout is enough to accommodate the 3" drop, 1-1/2" for the sandbox wall which is usually made of a 2 x 4 piece of wood (we will need to know the width of the supporting boards) and 4" for the post. We know that a 4" x 4" post is actually 3.5" x 3.5", but the extra 1/2" gives you a little wiggle room.



FORM NOT REQUIRED TO BE SENT IN, IF THERE ARE NO POSTS OR OTHER CUTOUTS
NO ORDER WITH POSTS OR OTHER CUTOUTS WILL BE PROCESSED
WITHOUT THIS FORM COMPLETED AND RETURNED TO US, EVEN IF THE ORDER IS PLACED ONLINE.

Fill out and fax completed form to
901-531-8436.

All custom sandbox covers are made to your specifications. Therefore, all sales are final. No refunds or returns can, or will, be accepted.



BELOW MARK THE APPROPRIATE SQUARE FOOTAGE WHEN ORDERING YOUR COVER, TO DETERMINE THE SQUARE FOOTAGE, MULTIPLY THE LENGTH AND WIDTH IN INCHES AND DIVIDE BY 144 Example 75" x 75" = 5625 divided by 144 = 39.06 square feet. So in the square footage drop down box below, click on the square footage of "35 to 45 square feet", this will then add $40 to the base price of $104.95 which is the price for 1 to 25 square feet.

Please make note that these sandbox cover prices are based upon total square footage. The base price is for a cover that are 1 to 25 square feet and if it is more than 25 square feet, then an additional charge is added to the base price. You can see below when ordering with the additional square footage how much additional cost is added to the base price.

Features:
  • Heavy duty 18oz solid reinforced poured rubber
  • All vinyl is made of laminated material with mildew retardant added
  • Layered construction with poured rubber and a nylon mesh center
  • Full UV protection
  • Waterproof and weather resistant (note: Multiple colored covers may leak at the seams)
  • Available in Green and Blue
  • Grommets or snaps will be positioned approximately 12-16 inches apart depending on the length of each side
  • To determine the square footage of the cover you need, multiply the length in inches x the width in inches then divide that total by 144.
  • Custom Sandbox Covers - 18 oz Poured Rubber Vinyl - ID#:SBC-PR
    Mfg'd By: MightyCovers.com  SKU#:SBC-PR
    Fabric Type & Color:
    Fasteners:
    Drop:
    Corner Cutouts:
    Additional Cutouts:
    Add Drain Hole:
    Width of Supporting Boards:
    Length in Inches:
    Width in Inches:
    Square Footage:
    Regular Price: $155.50
    Sales Price: $104.95
    You Save $50.55 or 32.51%


      

    Last Updated: 01/20/2017 02:16 PM - ID:56

    Related Terms: Mesh, Solid, Poured Rubber, Custom Sandbox Cover, Cat Guard