Custom Sandbox Covers - 11oz Mesh and 15oz Vinyl

Keep Your Sandbox Clean and Protected with a Custom Sandbox Cover


Screw In Snaps
Screw In Snaps
Easy to install snaps.
The caps of the snaps are
installed in the cover and
the other parts attach with
a phillips head screwdriver.
Grommets are also available
Snaps are easy to install
and easy to use. Made of
stainless steel that resist
rust and corrosion.
Snaps are installed in the
covers 1/2 inch from the
edges
Easy to use Snaps
Easy to use Snaps
***IMPORTANT NOTE***
We do not try and match existing snap placements
that are on your play set now, however we send
new snaps to screw into your playset
with a phillips head screwdriver.

Mighty Covers™ can make a Custom Sandbox Cover for any size or type of sandbox that you may have. It doesn't matter if it is attached to a play set or if it is a stand alone sandbox. Only the best materials are used to make our covers. The most economical custom sandbox covers that we offer are made with an 11 oz. mesh fabric or a solid 15 oz. marine grade tri-laminated vinyl fabric. All hems and cutouts are reinforced with double stitching (see photo on right). You have a choice of pre-sewn in stainless steel snaps or grommets make for easy attachment.

Please note that even though the 15oz vinyl fabric is waterproof, when there are seams and water is allowed to puddle or stand on the seams, they could leak. To prevent this, the covers may need a ball, bucket or something else under the cover to tent up the cover and allow the water to drain off of the cover.

(PLEASE NOTE - If you choose snaps, we will send you the parts of the snaps that screw into the sides of your sandbox, using a phillips head screwdriver) Or you may choose no fasteners at all. On certain situations where the sandbox is made of brick or concrete and neither snaps or grommets will work, we can make hems with Velcro pockets, which can be filled with sand or other weighted materials.

Information for Measuring for a Sandbox Cover - If you have a 75"x75" sandbox (when you measure from the outside corner to outside corner of the frame) with 4x4 posts in each corner, and you want the cover to drop down over the outside edge of the sandbox by 3 inches and fasten into the side of the sandbox.

On the measuring form (Green button below marked "Print Required Quote/Order Form") you will need to put your length and width measurements (75"x75"), the thickness of the width of the supporting board (the thickness of the frame of your sandbox) for example if your frame is a 2x8 board turned up on it's edge, then the thickness is the 2" side, however even though lumber is called a 2x8, the actual measurements are 1-1/2"x7-1/2", that is the measurement that must be put on the form. And the posts may be 4x4's, but the posts are actually 3-1/2"x3-1/2" and should be noted on the measuring form. The finished cover will be 78"x78" with 8" square cutouts on each corner. The 8" cutout is enough to accommodate the 3" drop, 1-1/2" for the sandbox wall and 3-1/2" for the post.



Available 15 oz. Vinyl Colors
Click to Enlarge
Green
Green
Blue
Blue
Yellow
Yellow
Red
Red
Tan
Tan
Available 11 oz. Mesh Colors
Click to Enlarge
Green Mesh
Green Mesh
Blue Mesh
Blue Mesh


FORM NOT REQUIRED TO BE SENT IN, IF THERE ARE NO POSTS OR OTHER CUTOUTS
NO ORDER WITH POSTS OR OTHER CUTOUTS WILL BE PROCESSED
WITHOUT THIS FORM COMPLETED AND RETURNED TO US, EVEN IF THE ORDER IS PLACED ONLINE.

Fill out and fax completed form to
901-531-8436.

All custom sandbox covers are made to your specifications. Therefore, all sales are final. No refunds or returns can, or will, be accepted.

Check out our standard size Mesh Sandbox Covers if you have a 4'x4', 5'x5', or 6'x6' square sandbox with 4x4 corner posts.


BELOW MARK THE APPROPRIATE SQUARE FOOTAGE WHEN ORDERING YOUR COVER, TO DETERMINE THE SQUARE FOOTAGE, MULTIPLY THE LENGTH AND WIDTH IN INCHES AND DIVIDE BY 144 Example 75" x 75" = 5625 divided by 144 = 39.06 square feet. So in the square footage drop down box below, click on the square footage of "35 to 45 square feet", this will then add $25 to the base price of $79.95 which is the price for 1 to 25 square feet.

Please make note that these sandbox cover prices are based upon total square footage. The base price is for a cover that are 1 to 25 square feet and if it is more than 25 square feet, then an additional charge is added to the base price. You can see below when ordering with the additional square footage how much additional cost is added to the base price.

Features:
  • Heavy marine grade vinyl and mesh fabric:
  • Mesh Cover is 11 oz. heavy duty
  • Solid Vinyl Cover is 15 oz. - THE THICKEST IN THE INDUSTRY.
  • All vinyl is made of laminated material with mildew retardant added
  • Triple layered construction with nylon mesh center Full UV protection
  • Waterproof and weather resistant (note: Multiple colored covers may leak at the seams)
  • Available in Green, Blue, Yellow, Red, or Tan in solid

  • To determine the square footage of the canopy you need, multiply the length in inches x the width in inches then divide that total by 144.
  • Custom Sandbox Covers - 11oz Mesh and 15oz Vinyl - ID#:SBC-CC
    Mfg'd By: MightyCovers.com  SKU#:SBC-CC
    Fabric Type & Color:
    Fasteners:
    Drop:
    Corner Cutouts:
    Additional Cutouts:
    Add Drain Hole Grommet:
    Width of Supporting Boards:
    Length in Inches:
    Width in Inches:
    Square Footage:
    Regular Price: $119.99
    Sales Price: $79.95
    You Save $40.04 or 33.37%


      

    Last Updated: 01/20/2017 02:16 PM - ID:55

    Related Terms: custom, Cat Guard, Solid, Sandbox Cover, Mesh Cover, vinyl