New from Rule Pool Systems comes the finest pool cover pump ever designed. The Rule pool cover pump system features a powerful 1800 gallon per hour automatic submersible pump with a specially designed strainer base that filters out leaves and debris. Water doesn't stand a chance against it!
Just attach a standard garden hose and plug in the pump. Starting and stopping is completely automatic. The pump will continuously monitor the water level on the cover and when enough water enters the bottom of the pump, the pump turns on and removes it. The pump also features freeze protection, so ice will not hurt it. You can leave it on all winter long. Use it wherever standing water accumulates. For water applications only.
Rule Automatic Pool Cover Pumps turn on and check for water approximately every 1-1/2 minutes. During this "check", the pump runs for about one second and checks for resistance or drag against the impeller. If resistance (water) is found, it will run for as long as water is present. When all the water is pumped out, the pump shuts off and returns to its 2-1/2 minute test cycle. The pump can be started at any time by disconnecting it from the power source, waiting for 5 seconds and reconnecting to the power source
This item has been discontinued. We apologize for any inconvenience.
Last Updated: 01/20/2017 02:25 PM - ID:1769
Related Terms: pool pumps, pump, pool cover pumps, swimming pool pumps, pool pump, swimming pool pump, pool cover pump, pumps